The PRM10P is a locking pull ring plunger with an M10X1.5 thread size. It has a 1.2" thread length and a 6mm plunger diameter. With an initial end force of 9 N

The VLIER PRM12 is a steel locking pull ring plunger with a M12X1.75 thread size, 1.4" thread length, and 8mm plunger diameter. It has a 12.7mm plunger projecti

The VLIER PRM12P is a steel locking pull ring plunger with a M12X1.75 thread size, 1.4" thread length, and 8mm plunger diameter. It has a 12.7mm plunger project

The VLIER PRM16 is a steel locking pull ring plunger with a M16X2.0 thread size, 1.7" thread length, and 10mm plunger diameter. It has a 16mm plunger projection

The PRM16P is a locking pull ring plunger with an M16X2.0 thread size. It has a 1.7" thread length and a 10mm plunger diameter. With an initial end force of 11

The VLIER PRM6 is a steel locking pull ring plunger with a M6X1.0 thread size, 0.31" thread length, and 4mm plunger diameter. It has a 6.4mm plunger projection

The PRM6P is a locking pull ring plunger with an M6X1.0 thread size. It has a 0.8" thread length and a 4mm plunger diameter. With an initial end force of 4.4 N

The PROFIHUB B5 is a 5-channel Profibus DP repeater with a voltage rating of 10-32 VDC, manufactured by PROCENTEC. With its reliable performance and easy instal

The PROGRESSIVE-RG-FITTING-D8/G1/2 is a ring fitting manufactured by IFM. With a maximum pressure rating of 50 bar and an 8mm diameter, this fitting ensures sec

The PROTECTION0-CAP-M20X1.5 is a valve sensor protection cap manufactured by IFM. With an M20x1.5 thread, this cap ensures the protection and safety of valve se

The PRSL0430PI by TER TECNO ELETTRICA RAVASI is an adaptor plate for FOX to GF4C footprint. With its feet, it ensures easy installation and secure connection. T

The VLIER PRSN250 is a steel pull ring plunger with a 1/4-20 thread size, 0.31" thread length, and 0.16" plunger diameter. It has a 0.19" plunger projection and

The PRSN250A is a steel pull ring plunger manufactured by VLIER. With a 1/4-20 thread and a plunger projection of 0.19", it is designed for precise positioning

The VLIER PRSN250P is a steel pull ring plunger with a 1/4-20 thread size, 0.31" thread length, and 0.16" plunger diameter. It has a 0.19" plunger projection an

The PRSN375 is a steel pull ring plunger with a 3/8-16 thread size. It has a 1/4" plunger diameter and a 0.28" plunger projection. With an initial end force of

The PRSN375P is a steel pull ring plunger with a 3/8-16 thread size. It has a 0.31" thread length and a 1/4" plunger diameter. With an initial end force of 0.75

The PRSN500 is a steel pull ring plunger with a 1/2-13 thread size. It has a 0.43" thread length and a 0.31" plunger diameter. With an initial end force of 1 lb

The VLIER PRSN500P is a steel pull ring plunger with a 1/2-13 thread size and a 0.43" thread length. It has a 0.31" plunger diameter and a 0.38" plunger project

The PRSN625 is a steel pull ring plunger with a 5/8-11 thread and a 0.38" plunger diameter. It has a plunger projection of 0.44" and a maximum ball reach of 0.9

The VLIER PRSN625P is a steel pull ring plunger with a 5/8-11 thread size, 0.56" thread length, and 0.38" plunger diameter. It has a 0.44" plunger projection an