VLIER
PRSN375
The PRSN375 is a steel pull ring plunger with a 3/8-16 thread size. It has a 1/4" plunger diameter and a 0.28" plunger projection. With an initial end force of
PRSN375P
The PRSN375P is a steel pull ring plunger with a 3/8-16 thread size. It has a 0.31" thread length and a 1/4" plunger diameter. With an initial end force of 0.75
PRSN500
The PRSN500 is a steel pull ring plunger with a 1/2-13 thread size. It has a 0.43" thread length and a 0.31" plunger diameter. With an initial end force of 1 lb
PRSN500P
The VLIER PRSN500P is a steel pull ring plunger with a 1/2-13 thread size and a 0.43" thread length. It has a 0.31" plunger diameter and a 0.38" plunger project
PRSN625
The PRSN625 is a steel pull ring plunger with a 5/8-11 thread and a 0.38" plunger diameter. It has a plunger projection of 0.44" and a maximum ball reach of 0.9
PRSN625P
The VLIER PRSN625P is a steel pull ring plunger with a 5/8-11 thread size, 0.56" thread length, and 0.38" plunger diameter. It has a 0.44" plunger projection an
PRSNM10
The VLIER PRSNM10 is a steel pull ring plunger with a M10X1.5 thread size, 0.31" thread length, and 1/4" plunger diameter. It has a 0.28" plunger projection and
PRSNM10P
The PRSNM10P is a steel pull ring plunger with an M10X1.5 thread size. It has a 0.31" thread length and a 1/4" plunger diameter. With an initial end force of 0.
PRSNM12P
The VLIER PRSNM12P is a steel pull ring plunger with a M12X1.75 thread size and a 0.43" thread length. It has a 0.31" plunger diameter and a 0.38" plunger proje
PRSNM16P
The VLIER PRSNM16P is a steel pull ring plunger with a M16X2.0 thread size, 0.56" thread length, and 0.38" plunger diameter. It has a 0.44" plunger projection a
PRSNM6
The VLIER PRSNM6 is a steel pull ring plunger with a M6X1.0 thread size and a 0.31" thread length. It has a 0.16" plunger diameter and a 0.19" plunger projectio
PRSNM6P
The PRSNM6P is a steel pull ring plunger with an M6X1.0 thread size. It has a 0.31" thread length and a 0.16" plunger diameter. With an initial end force of 0.5
PRT250
The VLIER PRT250 is a knob handle plunger with a 1/4-20 thread size and a maximum plunger diameter of 0.16". It provides an initial end force of 0.12 lbs and a
PRT250P
The PRT250P is a knob handle plunger with a 1/4-20 thread size. It has a maximum plunger diameter of 0.16" and an initial end force of 0.12 lb, which increases
PRT375
The VLIER PRT375 is a locking knob handle plunger with a 3/8-16 thread size and a maximum plunger diameter of 1/4". It provides an initial end force of 0.25 lbs
PRT500P
The VLIER PRT500P is a knob handle plunger with a 1/2-13 thread size and a maximum plunger diameter of 0.31". It provides an initial end force of 0.5 lbs and a
PRTL250P
The PRTL250P is a knob handle plunger with a 1/4-20 thread size. It has a maximum plunger diameter of 0.16" and an initial end force of 0.12 lb, which increases
PRTL375
The VLIER PRTL375 is a locking knob handle plunger with a 3/8-16 thread size and a maximum plunger diameter of 1/4". It provides an initial end force of 0.25 lb
PRTL375P
The VLIER PRTL375P is a locking knob handle plunger with a 3/8-16 thread size and a maximum plunger diameter of 1/4". It provides an initial end force of 0.25 l
| Part Number | Description | Manufacturer | Price & Lead Time |
|---|---|---|---|
The PRSN375 is a steel pull ring plunger with a 3/8-16 thread size. It has a 1/4" plunger diameter and a 0.28" plunger projection. With an initial end force of | VLIER | Request Quote | |
The PRSN375P is a steel pull ring plunger with a 3/8-16 thread size. It has a 0.31" thread length and a 1/4" plunger diameter. With an initial end force of 0.75 | VLIER | Request Quote | |
The PRSN500 is a steel pull ring plunger with a 1/2-13 thread size. It has a 0.43" thread length and a 0.31" plunger diameter. With an initial end force of 1 lb | VLIER | Request Quote | |
The VLIER PRSN500P is a steel pull ring plunger with a 1/2-13 thread size and a 0.43" thread length. It has a 0.31" plunger diameter and a 0.38" plunger project | VLIER | Request Quote | |
The PRSN625 is a steel pull ring plunger with a 5/8-11 thread and a 0.38" plunger diameter. It has a plunger projection of 0.44" and a maximum ball reach of 0.9 | VLIER | Request Quote | |
The VLIER PRSN625P is a steel pull ring plunger with a 5/8-11 thread size, 0.56" thread length, and 0.38" plunger diameter. It has a 0.44" plunger projection an | VLIER | Request Quote | |
The VLIER PRSNM10 is a steel pull ring plunger with a M10X1.5 thread size, 0.31" thread length, and 1/4" plunger diameter. It has a 0.28" plunger projection and | VLIER | Request Quote | |
The PRSNM10P is a steel pull ring plunger with an M10X1.5 thread size. It has a 0.31" thread length and a 1/4" plunger diameter. With an initial end force of 0. | VLIER | Request Quote | |
The VLIER PRSNM12P is a steel pull ring plunger with a M12X1.75 thread size and a 0.43" thread length. It has a 0.31" plunger diameter and a 0.38" plunger proje | VLIER | Request Quote | |
The VLIER PRSNM16P is a steel pull ring plunger with a M16X2.0 thread size, 0.56" thread length, and 0.38" plunger diameter. It has a 0.44" plunger projection a | VLIER | Request Quote | |
The VLIER PRSNM6 is a steel pull ring plunger with a M6X1.0 thread size and a 0.31" thread length. It has a 0.16" plunger diameter and a 0.19" plunger projectio | VLIER | Request Quote | |
The PRSNM6P is a steel pull ring plunger with an M6X1.0 thread size. It has a 0.31" thread length and a 0.16" plunger diameter. With an initial end force of 0.5 | VLIER | Request Quote | |
The VLIER PRT250 is a knob handle plunger with a 1/4-20 thread size and a maximum plunger diameter of 0.16". It provides an initial end force of 0.12 lbs and a | VLIER | Request Quote | |
The PRT250P is a knob handle plunger with a 1/4-20 thread size. It has a maximum plunger diameter of 0.16" and an initial end force of 0.12 lb, which increases | VLIER | Request Quote | |
The VLIER PRT375 is a locking knob handle plunger with a 3/8-16 thread size and a maximum plunger diameter of 1/4". It provides an initial end force of 0.25 lbs | VLIER | Request Quote | |
The VLIER PRT500P is a knob handle plunger with a 1/2-13 thread size and a maximum plunger diameter of 0.31". It provides an initial end force of 0.5 lbs and a | VLIER | Request Quote | |
The PRTL250P is a knob handle plunger with a 1/4-20 thread size. It has a maximum plunger diameter of 0.16" and an initial end force of 0.12 lb, which increases | VLIER | Request Quote | |
The VLIER PRTL375 is a locking knob handle plunger with a 3/8-16 thread size and a maximum plunger diameter of 1/4". It provides an initial end force of 0.25 lb | VLIER | Request Quote | |
The VLIER PRTL375P is a locking knob handle plunger with a 3/8-16 thread size and a maximum plunger diameter of 1/4". It provides an initial end force of 0.25 l | VLIER | Request Quote | |
The PRTL500P is a locking knob handle plunger with a 1/2-13 thread. It has a maximum plunger diameter of 0.31" and an initial end force of 0.5 lb, which increas | VLIER | Request Quote |
+1 (469) 283-2440